Choose Language

Your Favorites

  • OLYMPIC<sup>®</sup> TRIUMPH<sup>â„¢</sup> Exterior Solid Stain + Sealant 🇨🇦
  • Olympic Triumph Solid FR
  • OLYMPIC<sup>®</sup> TRIUMPH<sup>â„¢</sup> Exterior Solid Stain + Sealant 🇨🇦
  • Olympic Triumph Solid FR

OLYMPIC® TRIUMPHâ„¢ Exterior Solid Stain + Sealant 🇨🇦

Olympic® TRIUMPHâ„¢ Advanced Stain + Sealant in One is a super-premium stain formulated to protect and enhance your wood's natural beauty with exceptional richness and depth of colour. TRIUMPHâ„¢ solid colour stain delivers a rich, durable low-luster, opaque finish that covers the grain yet accentuates wood texture. Available in 42 wood and nature-inspired colours.

OLYMPIC® TRIUMPHâ„¢ is exclusively sold at THE HOME DEPOT.

  • Product only available in Canada
  • Delivers rich, durable wood tones
  • Advanced Stain + Sealant in One protects and beautifies in one step
  • Low-luster finish provides a more dirt and mildew resistant coating than standard flat solid colour stains
  • Self-priming on most bare or previously coated surfaces
  • Colour Richâ„¢ Technology - colour formula that protects that natural look of wood and maximizes durability
  • All-Climate Protection Packageâ„¢
    • Urethane-fortified for toughness
    • Exceptional UV resistance
    • Enhanced waterproofing protection
    • Provides a powerful mildew and algae-resistant coating
  • Curated colour palette includes 42 rich hues selected for natural beauty and durability
Read more
Select a wood stain color above to buy online
Find a Retailer

Stain in 4 Easy Steps

Test
Wood Staining - Step 1 )

How Much Wood Stain Do I Need?

Use our Stain Calculator. The size of your project will determine how much wood stain is needed. Remember, solid color wood stains require two coats.
Wood Staining - Step 2)

Clean Your Deck Or Patio

Sweep debris from your deck, then use Olympic Premium Deck Cleaner to wash away dirt and stains caused by mildew. See these How To Stain Wood articles for other staining projects.
Wood Staining - Step 3)

Prep Your Wood Surface

Tape off the surfaces of your deck or patio you don't want stained. Avoid staining in direct sunlight so the wood stain does not dry unevenly. Then get ready to apply wood stain!
Wood Staining - Step 4)

Apply Wood Stain

For even coverage, apply the wood stain to one board at a time. For best results, backbrush into the wood surface.
Refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Wood Stain Transparency Guide

Clear Wood Finishes

Clear wood finishes & wood stains allow your wood to weather and gray naturally. Least protection, most woodgrain.

Transparent / Toner

Transparent wood stains add a slight hint of color that highlights the wood grain. Less protection, more woodgrain.

Semi-Transparent Stain

Semi-transparent wood stains provide rich color that allows wood grain and texture to show. More protection, less woodgrain.

Semi-Solid Stain

Semi-solid stains give the same rich color as semi-transparent, but hides more wood grain. More protection, least woodgrain.

Solid Color Stain

Solid Color Stain​ covers the woodgrain and accentuates the natural texture. Most protection, no woodgrain.

Deck Resurfacer

A deck resurfacer creates a new, safe, durable surface on worn or weathered wood or concrete.

Application Details

Warranty

Our Best. Satisfaction Guarantee.

Olympic® Paints and Stains guarantees satisfaction with the application and performance properties of this product when applied to a properly prepared surface in accordance with label directions. This guarantee is limited to your choice of product replacement or refund of the purchase price. See product label for more details.

Coverage

One gallon covers approximately 32.2 to 46.5 sq. meters or 350 to 500 sq. ft per 3.78 Liters or 1 gallon depending on application, wood texture and porosity.

Application

Apply to a small area and allow to dry to ensure acceptable appearance and penetration. Two coats are recommended for maximum durability. Apply first thin coat with a high-quality brush, paint/stain pad, or spray equipment. Apply second coat between 4-72 hours after first coat. Can be applied down to 2°C.

Drying Time

Normally dries to the touch in 30 minutes when applied in optimal temperatures of 10°C to 29°C or 50°F to 85°F. Allow 2 to 4 hours between coats or before recoating. Application in high humidity or in temperatures below 10°C or 50°F may prolong drying and recoating times. Allow 24 to 48 hours of drying time before light foot traffic or replacing furniture.

Drying times may vary depending on temperature, humidity, film build, colour and air movement.

Cleanup

Clean brushes and tools with warm, soapy water.

Disposal

Contact your local environmental regulatory agency for guidance on disposal of unused product. Do not pour down a drain or storm sewer.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Code Finish Base Sizes Download
8233121C Solid/Opaque Stain - Tint Base Gallon/3.78 L (01), 1/2 Pint/236 mL (16), Gallon/3.78 L (01)
8233141C Solid/Opaque Stain - Tint Base Gallon/3.78 L (01), 1/2 Pint/236 mL (16), Gallon/3.78 L (01), Gallon/3.78 L (01)