Polyurethane

Olympic Fast-Drying Polyurethane is a self-leveling oil-modified urethane that provides professional results on a wide variety of surfaces.  The durable polyurethane wood finish gives a warm, amber tone to interior wood surfaces and is ideal for stained or bare wood surfaces including, furniture, floors, cabinets, doors, windows and trim.  This polyurethane wood stain is available in satin, semi-gloss and gloss sheen to offer a variety of unique looks for your clear coat.

  • Olympic Fast-Drying Polyurethane delivers a clear finish
  • Durable polyurethane protects your projects from abrasion and marring common with underprotected surfaces
  • Polyurethane dries fast for a quick, precise wood finishing project
  • Enhances interior wood surfaces with a warm amber tone
  • Oil-modified urethane formula is self-leveling to help ensure even, professional application
  • Polyurethane wood finish is durable and helps to preserve the integrity and beauty of interior woodwork
  • This polyurethane is ideal for stained or bare interior wood surfaces like wood furniture, floors, cabinets, doors and trim 
  • For more information on how to choose the right stain check out our Polyurethanes guide.
Read more
Select a wood stain color above to buy online

Product Features

Coverage

Polyurethane covers approximately 125 sq. feet per quart depending on application and wood porosity

Area Preparation

Surface must be clean and dry. Remove all loose and peeling paint, dust, dirt, grease, oils, wax, and any other surface contaminants. Bare Wood: Sand with 220-grit sandpaper along the wood grain until smooth. Remove all dust. Stain if desired. When applying over stained wood, ensure stain is thoroughly dry. Previously Coated Wood: If the clean surface is in good condition, sand with 220-grit sandpaper. Remove all dust. If the finish is damaged or deteriorated, complete removal of the finish is recommended. Do not use polyurethane over light-colored surfaces, wax, shellac, fresh lacquer, lacquer sanding sealer, silicones, or stearates.

Application Details

Provide adequate ventilation. Stir well before and during use. Do not shake. DO NOT THIN. Apply with a high-quality, natural bristle brush, pad, or spray equipment. Apply thin, even coats with the grain of the wood. For adequate protection, a minimum of two coats are required. A minimum of three coats are recommended for applications to interior floors. Between coats, sand with 220-grit or finer sandpaper along the wood grain until smooth. Remove dust.  Additional and/or maintenance coats will extend the life of the finish. Recoat at the earliest sign of peeling, cracking, or excessive wear. Air, product, and surface temperatures between 50°F (10°C) and 90°F (32°C).

Drying Time

Requires 4 hours of dry time before adding another coat, and 24 hours before use.

Product Warning

Please refer to the product label, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for detailed safety and application instructions. 

If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead

Code Finish Base Sizes Download
603401 Clear Clear Finish Gallon/3.78 L (01) N/A
603402 Clear Clear Finish Gallon/3.78 L (01) N/A
603403 Clear Clear Finish Gallon/3.78 L (01) N/A
603501 Clear Clear Finish Quart/946 mL (04) N/A
603502 Clear Clear Finish Quart/946 mL (04) N/A
603503 Clear Clear Finish Quart/946 mL (04) N/A